atahualpa
domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init
action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home3/aboarddi/public_html/blog/wp-includes/functions.php on line 6114We narrowed down the water maker problems to a combination of factors. The filters had got a little clogged. In the past, an indicator would suggest that the filters were in need of attention. In this case, I think we must have picked up some larger particles which had clogged up the 50 micron filter. The error message suggested I needed to pay attention to the strainer which I did but it was only when I washed out the filters did most of the problems go away. That still left us with a faulty salinity probe. Spectra are again sending one free of charge. We’re hoping this one will be more reliable than the last two. We were able to make water by bypassing the alarm so we now have full tanks for our haul out.\n<\/p>\n
In the afternoon, once the sun had lowered, I focused on the windlass which requires a once a year clean up and greasing. It turned out to be quite difficult prising apart the clutch for manual operation. Once we had managed to break it down, clean it and grease it up it seemed to work far better than ever. When my parents were with us we had a nasty moment with the windlass when it failed and we could not get it to work manually. We now suspect that the last annual <\/a>maintenance was not thorough enough as the clutch, once greased, behaved so much better nine months ago. Bit by bit we learn more.\n<\/p>\n